Wireless battery-powered switch, 1-fold, Zigbee®
This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
Product details
Wireless battery-powered switch, onefold, Zigbee®
This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The single key and faceplate must be ordered separately. This onefold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
Specification description
Wireless battery-powered switch, onefold, Zigbee®.
- Maximum range (from switch to smart hub): 10 m
- Power supply: via battery 3 V DC, CR2450
- Battery lifespan: 5 years at 20 actuations/day
- Antenna: integrated antenna
- Humidity: 0 – 95 % relative humidity, non-condensing
- Maximum per installation:
- max. 50 connected Zigbee® devices per Niko Home Control installation
- stand-alone: max. 8 Zigbee® receivers (ON/OFF/dimming) per switch
- Ambient temperature operation: 5 °C – 30 °C
- Ambient temperature storage: 0 °C – 40 °C
- Compatible with the wireless bridge
- Communication protocol: Zigbee® 3.0
- Maximum radio frequency power: 8 dBm
- Operating frequency: 2.4 GHz
- System compatibility: talks with Homey (Zigbee®)
- Protection degree: IP20
- Required type of flush-mounting box
- depth: min. 40 mm (cabling space included)
- claw/screw fixing: 60 mm
- inner diameter box: 60 mm
- multiple boxes centre distance horizontal: 71 mm
- multiple boxes centre distance vertical: 71 mm
- multiple boxes centre distance vertical: 60 mm for Belgium and France
- Fixing method
screw fixing or gluing
- Dimensions (HxWxD): 71 x 71 x 10 mm
- Weight: 23 g
- Certification marks: Zigbee Certified Product
- Marking: CE
Metal base for wireless battery-powered Zigbee® switch, 60 x 71 mm, claw fixing
Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 60 x 71 mm, with claw fixing. The base includes a safety protection cover.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Metal base for wireless battery-powered Zigbee® switch, 60 x 71 mm, screw fixing
Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 60 x 71 mm, with screw fixing. The base includes a safety protection cover.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Metal base for wireless battery-powered Zigbee® switch, 71 x 71 mm, claw fixing
Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 71 x 71 mm, with claw fixing. The base includes a safety protection cover.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Metal base for wireless battery-powered Zigbee® switch, 71 x 71 mm, screw fixing
Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 71 x 71 mm, with screw fixing. The base includes a safety protection cover.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Wireless battery-powered switch, onefold, Zigbee®, excluding base
This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch must be mounted on a metal base (552-720X0), making it possible to install the switch on a flush-mounting box. If you want to install the onefold wireless battery-powered Zigbee® on a flat wall, order the variant with a plastic base instead (552-72001). The single key, faceplate and metal base must be ordered separately. This onefold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
Specification description
Wireless battery-powered switch, onefold, Zigbee®, excluding base.
- Mounting method: flush-mounting box
- Maximum range (from switch to smart hub): 10 m
- Power supply: via battery 3 V DC, CR2450
- Battery lifespan: 5 years at 20 actuations/day
- Antenna: integrated antenna
- Humidity: 0 – 95 % relative humidity, non-condensing
- Maximum per installation:
- max. 50 connected Zigbee® devices per Niko Home Control installation
- stand-alone: max. 8 Zigbee® receivers (ON/OFF/dimming) per switch
- Ambient temperature operation: 5 °C – 30 °C
- Ambient temperature storage: 0 °C – 40 °C
- Compatible with the wireless bridge
- Communication protocol: Zigbee® 3.0
- Maximum radio frequency power: 8 dBm
- Operating frequency: 2.4 GHz
- System compatibility: talks with Homey (Zigbee®)
- Protection degree: IP20
- Required type of flush-mounting box
- depth: min. 40 mm (cabling space included)
- claw/screw fixing: 60 mm
- inner diameter box: 60 mm
- multiple boxes centre distance horizontal: 71 mm
- multiple boxes centre distance vertical: 71 mm
- multiple boxes centre distance vertical: 60 mm for Belgium and France
- Dimensions (HxWxD): 45 x 46 x 9 mm
- Weight: 17 g
- Certification marks: Zigbee Certified Product
- Marking: CE
Finishing set for a single electronic switch or push button, cream
Finishing set for a single electronic switch or push button. Finishing colour: cream.
Related products
Wireless smart hub for Niko Home Control
The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software or the Niko Home app.
Connected switching socket outlet with pin earthing and shutters, Zigbee®
The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.
Digital black, connected customisable control screen, 230 V
Digital black is a customisable control screen for Niko Home Control with an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near. When there is no Niko Home Control installation available, the built-in switching contact can be controlled via the touchscreen or an N.O. push-button extension (170-X00XX). When the connection to a Niko Home Control installation has been made, it becomes possible to switch or dim your lights, set scenes, set ventilation modes and adjust blinds and sunblinds to the desired position in one operation. In short, all possible Niko Home Control control types are available. Do you have an active connection with one of our heating partners? Then you can easily set the temperature with the Digital black. With the Niko Home app you can choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the App store or the Google Play store. Digital black can be easily mounted in any standard flush-mounting box using the familiar claw or screw fixing and is powered on 230 Vac (L- + N-wire required). This 230 Vac variant is equipped with a switching contact 10 A (resistive), meaning that it can easily be replaced with a conventional single-pole switch. In combination with the wireless smart hub for Niko Home Control (552-00001) and additional controls from the Niko Home Control range for traditional wiring, you can easily add automation to your conventional installation. The screen communicates via your Wi-Fi network with the rest of your Niko Home Control system. You need an active internet connection to activate Digital black. This internet connection ensures that your Digital black and Niko Home Control installation are always up-to-date and have the most recent functionalities.
