! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Connected controller light for Niko Home Control

Reference code
550-00002

No longer available since June 2018

Technical manuals
Certificaten CE-Marking

Description

The connected controller light is the central module of every Niko Home Control installation. It directs the logic and supplies power to bus, modules and controls. The light version does not offer IP functionality, meaning it is impossible to connect IP devices (such as smartphones, touchscreens or external video units) to the Niko Home Control installation. Per installation only one connected controller is necessary.

Specification description

Connected controller light for Niko Home Control.

  • Function: The connected controller light is the central module of every Niko Home Control installation. It is responsible for the logic of the installation and supplies power to the box, modules and controls. The light version does not offer IP functionality, which means it is not possible to connect IP devices (such as smartphones, touchscreens or external video units) to the Niko Home Control installation. Each installation must consist of one connected controller. The module includes a TEST button to verify the proper functioning and status of all other modules. The connected controller is connected to the resident’s home network via the WAN gateway. An IP address will be assigned to the connected controller by the network router. Via this connection, the controller communicates with Niko Home Control software, such as the user setting software or the energy software (to consult consumption or production data). After registration on https://mynikohomecontrol.niko.eu, you can enjoy the Niko services for upgrade or diagnosis of the installation.
  • Sliding contact to connect the module to the following module on the DIN rail
  • One RJ45 port at the bottom for communication via TCP/IP
  • Button for manual programming
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Output voltage: 26 Vdc, max. 400 mA (SELV, safety extra-low voltage)
  • Connection terminals: 4 plug-in terminals at the top to connect the module with the rail coupler on the next DIN rail + 4 plug-in terminals at the bottom of the module to be provided with 230Vac power supply voltage and daisy-chained if necessary
  • DIN dimensions: 6U
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )